2016 Honda Fit Oil Capacity: Exact 1.5L Refill Specs
2016 Honda Fit Oil Capacity: Exact 1.5L Refill Specs with application chart, generation boundaries, verification steps and official manufacturer lookup.
Honda specifies 3.5 US qt (3.3 L) when the oil filter is changed on a 2016 Fit 1.5L. An oil-only change is 3.3 US qt (3.1 L).
Honda specifies 3.5 US qt (3.3 L) when the oil filter is changed on a 2016 Fit 1.5L. An oil-only change is 3.3 US qt (3.1 L).
These quantities are for the U.S.-market 2016 Fit with the 1,498 cc engine. Other Fit/Jazz generations and markets are not silently grouped into this row; identify the model year before using it.
Interactive 2016 Fit 1.5L specification guide
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Orientation aid only. Match the VIN, engine, trim and manufacturer document before use.
Honda Fit Oil Capacity Specifications
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Oil and filter change | 3.5 US qt | 3.3 L; 2016 Honda specification |
| Oil change, filter retained | 3.3 US qt | 3.1 L |
| Recommended viscosity | SAE 0W-20 | Use oil meeting the manual's quality requirement |
| Final verification | Dipstick upper mark | Check after circulation and drain-back |
Install a new drain-plug washer, refill with the specified 0W-20 oil, run the engine and inspect the filter and drain plug for leaks. Stop the engine, allow drain-back on level ground, and use the dipstick as the final level check rather than treating the published refill quantity as an instruction to overfill.
Application boundaries for 2016 Fit 1.5L
These quantities are for the U.S.-market 2016 Fit with the 1,498 cc engine. Other Fit/Jazz generations and markets are not silently grouped into this row; identify the model year before using it.
Install a new drain-plug washer, refill with the specified 0W-20 oil, run the engine and inspect the filter and drain plug for leaks. Stop the engine, allow drain-back on level ground, and use the dipstick as the final level check rather than treating the published refill quantity as an instruction to overfill.
Honda 2016 Fit 1.5L specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Honda 2016 Fit 1.5L.
2016 Honda Fit Oil Capacity: Exact 1.5L Refill Specs FAQs
How much oil does a 2016 Honda Fit take?+
3.5 US qt (3.3 L) when the oil filter is changed, or 3.3 US qt (3.1 L) for an oil-only change, on the U.S.-market 2016 Fit 1.5L.
Which oil does it require?+
SAE 0W-20 meeting the quality requirement stated in the manual.
Does this apply to other Fit or Jazz model years?+
No. These quantities are for the 2016 U.S.-market car with the 1,498 cc engine. Other Fit and Jazz generations and markets are not grouped into this row — identify the model year first.
What should I replace besides the oil and filter?+
Install a new drain-plug washer. After refilling, run the engine, inspect the filter and drain plug for leaks, then stop the engine, allow drain-back on level ground and use the dipstick's upper mark as the final check rather than treating the published quantity as an instruction to overfill.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
12016 Honda Fit Owner's Guide — specificationsPrimary Honda specifications table listing 3.5 US qt (3.3 L) for an oil-and-filter change and 3.3 US qt (3.1 L) without filter.↗