Fluid CapacitiesDirect source linked

2024 Nissan Frontier Oil Capacity: With and Without Filter

2024 Nissan Frontier Oil Capacity: With and Without Filter with application chart, generation boundaries, verification steps and official manufacturer lookup.

Sources researched August 14, 2026·1 source reference·Print-friendly
Direct source linkedAt least one application-specific manufacturer or component document is linked.How TorqueSheet prepares references
QUICK ANSWER

Nissan specifies approximately 5.25 US qt (5.0 L) for a 2024 Frontier oil change with a new filter and 5.0 US qt (4.7 L) when the filter is not changed.

Application note: These figures apply to the U.S.-market 2024 Frontier's 3.8L V6. Older 2.5L four-cylinder and 4.0L V6 trucks use different rows, so the familiar capacity from an earlier generation should not be carried forward.

Nissan specifies approximately 5.25 US qt (5.0 L) for a 2024 Frontier oil change with a new filter and 5.0 US qt (4.7 L) when the filter is not changed.

These figures apply to the U.S.-market 2024 Frontier's 3.8L V6. Older 2.5L four-cylinder and 4.0L V6 trucks use different rows, so the familiar capacity from an earlier generation should not be carried forward.

2024 Nissan Frontier Oil Capacity: With and Without Filter — TorqueSheet technical feature image
TorqueSheet technical reference artwork · torquesheet.com
Orientation aid only. Match the VIN, engine, trim and manufacturer document before use.
WORKBENCH VIEW

Interactive 2024 Frontier 3.8L specification guide

SELECTED1Position 1 of 4
TS

Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.

Orientation aid only. Match the VIN, engine, trim and manufacturer document before use.

REFERENCE TABLE

Nissan Frontier Oil Capacity Specs

APPLICATION / ITEMSPECIFICATIONNOTES
Oil and filter change5.25 US qt5.0 L; 4-3/8 Imperial qt
Oil change, filter retained5.0 US qt4.7 L; 4-1/8 Imperial qt
Recommended viscositySAE 0W-20Synthetic
Required qualityAPI SP / ILSAC GF-6AFinal level by dipstick

Nissan recommends Genuine Nissan 0W-20 SP or an equivalent synthetic SAE 0W-20 meeting API SP and ILSAC GF-6A. The manual calls both quantities approximate because oil temperature and drain time affect the refill. Add less than the listed amount first, run the engine, inspect for leaks, shut it down, wait more than 10 minutes on level ground and use the dipstick to establish the final level.

Application boundaries for 2024 Frontier 3.8L

These figures apply to the U.S.-market 2024 Frontier's 3.8L V6. Older 2.5L four-cylinder and 4.0L V6 trucks use different rows, so the familiar capacity from an earlier generation should not be carried forward.

Nissan recommends Genuine Nissan 0W-20 SP or an equivalent synthetic SAE 0W-20 meeting API SP and ILSAC GF-6A. The manual calls both quantities approximate because oil temperature and drain time affect the refill. Add less than the listed amount first, run the engine, inspect for leaks, shut it down, wait more than 10 minutes on level ground and use the dipstick to establish the final level.

!
Build-specific specifications take priority

Nissan 2024 Frontier 3.8L specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.

SHARED PROCEDURES

Procedures used with this specification

These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Nissan 2024 Frontier 3.8L.

COMMON QUESTIONS

2024 Nissan Frontier Oil Capacity: With and Without Filter FAQs

How much oil does a 2024 Nissan Frontier take?+

About 5.25 US qt (5.0 L) with a new filter, or 5.0 US qt (4.7 L) when the filter is not changed, on the U.S.-market 2024 Frontier 3.8L V6.

Which oil does Nissan recommend?+

Genuine Nissan 0W-20 SP, or an equivalent synthetic SAE 0W-20 meeting API SP and ILSAC GF-6A.

Can I use the capacity from my older Frontier?+

No. The older 2.5L four-cylinder and 4.0L V6 trucks use different rows, so a familiar figure from an earlier generation should not be carried forward.

Why does Nissan call the quantity approximate?+

Oil temperature and drain time change how much comes out and therefore how much goes back in. Add less than the listed amount first, run the engine, inspect for leaks, shut it down, wait more than 10 minutes on level ground and set the final level from the dipstick.

SOURCE TRAIL

Technical sources

TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.

12024 Nissan Frontier Owner's Manual — recommended fluids and capacitiesPrimary Nissan table specifying 5.25 US qt (5.0 L) with filter, 5.0 US qt (4.7 L) without filter and synthetic 0W-20 SP/GF-6A.
SOURCES RESEARCHED · 2026-08-14

Sources shown.
Check the application.

480 reference pages.
21 vehicle makes.

Review status visible.
Every page shows its source trail.