2024 Hyundai Santa Fe 2.5 Turbo Oil Capacity and Oil Grade
2024 Hyundai Santa Fe 2.5 Turbo Oil Capacity and Oil Grade with application table, generation boundaries, verification steps.
Hyundai specifies a 6.13-US-qt (5.8-L) drain-and-refill quantity for the 2024 U.S.-market Santa Fe's Smartstream 2.5L turbo engine.
Hyundai specifies a 6.13-US-qt (5.8-L) drain-and-refill quantity for the 2024 U.S.-market Santa Fe's Smartstream 2.5L turbo engine.
This exact row is for the redesigned 2024 MX5a Santa Fe 2.5T. It must not be applied to the hybrid's 1.6T, earlier 2.4L/2.0T engines, the old 3.3L V6, or another market's powertrain.
Interactive 2024 Santa Fe 2.5T specification guide
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.
Hyundai Santa Fe Oil Capacity Specs
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Drain-and-refill quantity | 6.13 US qt | 5.8 L |
| Engine | Smartstream 2.5 T-GDI | 2024 U.S. Santa Fe |
| Oil viscosity | SAE 0W-30 | Full synthetic |
| Required quality | API SN PLUS/SP or ILSAC GF-6 | Use an approved oil |
The same Hyundai table calls for full-synthetic SAE 0W-30 meeting API SN PLUS/SP or ILSAC GF-6. Treat 6.13 qt as a service refill reference: add most of the quantity, circulate the oil, check for leaks, wait for drain-back on level ground and finish at the dipstick's full mark. The amount recovered during draining can vary.
Application boundaries for 2024 Santa Fe 2.5T
This exact row is for the redesigned 2024 MX5a Santa Fe 2.5T. It must not be applied to the hybrid's 1.6T, earlier 2.4L/2.0T engines, the old 3.3L V6, or another market's powertrain.
The same Hyundai table calls for full-synthetic SAE 0W-30 meeting API SN PLUS/SP or ILSAC GF-6. Treat 6.13 qt as a service refill reference: add most of the quantity, circulate the oil, check for leaks, wait for drain-back on level ground and finish at the dipstick's full mark. The amount recovered during draining can vary.
Hyundai 2024 Santa Fe 2.5T specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Hyundai 2024 Santa Fe 2.5T.
2024 Hyundai Santa Fe 2.5 Turbo Oil Capacity and Oil Grade FAQs
How much oil does a 2024 Hyundai Santa Fe 2.5 turbo take?+
6.13 US qt (5.8 L) for a drain-and-refill on the U.S.-market 2024 Santa Fe's Smartstream 2.5L turbo engine.
Which oil grade does the 2024 Santa Fe 2.5T require?+
Full-synthetic SAE 0W-30 meeting API SN PLUS/SP or ILSAC GF-6, from the same Hyundai table that lists the capacity.
Does 6.13 qt apply to the Santa Fe Hybrid?+
No. This row is for the redesigned 2024 MX5a Santa Fe 2.5T only. The hybrid's 1.6T, the earlier 2.4L and 2.0T engines, the old 3.3L V6 and other markets' powertrains each have their own quantity.
Should I pour in the full 6.13 quarts before checking?+
No. Add most of the quantity, circulate the oil, check for leaks, then wait for drain-back on level ground and finish at the dipstick's full mark. The amount actually recovered during draining varies, so the published figure is a service reference rather than a measured fill.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
12024 Hyundai Santa Fe Owner's Manual — recommended lubricants and capacitiesPrimary Hyundai MX5a table specifying 6.13 US qt (5.8 L) of full-synthetic SAE 0W-30 for the U.S.-market 2.5L turbo drain-and-refill service.↗