2026 Hyundai Palisade Oil Capacity and Required 0W-20
2026 Hyundai Palisade Oil Capacity and Required 0W-20 with application chart, generation boundaries, verification steps and official manufacturer lookup.
Hyundai specifies 6.13 US qt (5.8 L) for a drain-and-refill on the 2026 Palisade's Smartstream 3.5L GDI V6.
Hyundai specifies 6.13 US qt (5.8 L) for a drain-and-refill on the 2026 Palisade's Smartstream 3.5L GDI V6.
This is the exact U.S. 2026 LX3 Palisade row. Earlier Palisades use a 3.8L V6 with a different service quantity, so the familiar older-generation number must not be carried forward to the redesigned 3.5L vehicle.
Interactive 2026 Palisade 3.5L specification guide
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Orientation aid only. Match the VIN, engine, trim and manufacturer document before use.
Hyundai Palisade Oil Capacity Specs
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Drain-and-refill quantity | 6.13 US qt | 5.8 L |
| Engine | Smartstream 3.5 GDI | 2026 LX3 Palisade |
| Viscosity | SAE 0W-20 | Full synthetic |
| Oil quality | API SN PLUS/SP or ILSAC GF-6 | Certification required |
Use SAE 0W-20 full-synthetic oil meeting API SN PLUS/SP or ILSAC GF-6. Refill short of the listed quantity first, start the engine and check for leaks, shut it down on level ground and allow oil to return to the pan before bringing the dipstick to full. A published refill quantity is not permission to overfill.
Application boundaries for 2026 Palisade 3.5L
This is the exact U.S. 2026 LX3 Palisade row. Earlier Palisades use a 3.8L V6 with a different service quantity, so the familiar older-generation number must not be carried forward to the redesigned 3.5L vehicle.
Use SAE 0W-20 full-synthetic oil meeting API SN PLUS/SP or ILSAC GF-6. Refill short of the listed quantity first, start the engine and check for leaks, shut it down on level ground and allow oil to return to the pan before bringing the dipstick to full. A published refill quantity is not permission to overfill.
Hyundai 2026 Palisade 3.5L specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Hyundai 2026 Palisade 3.5L.
2026 Hyundai Palisade Oil Capacity and Required 0W-20 FAQs
How much oil does a 2026 Hyundai Palisade take?+
6.13 US qt (5.8 L) for a drain-and-refill on the 2026 Palisade's Smartstream 3.5L GDI V6.
Can I use the oil capacity from my older Palisade?+
No. Earlier Palisades use a 3.8L V6 with a different service quantity, and that familiar number must not be carried forward to the redesigned 3.5L vehicle.
Which oil does the 2026 Palisade require?+
SAE 0W-20 full-synthetic oil meeting API SN PLUS/SP or ILSAC GF-6.
Should I add all 6.13 quarts before checking the dipstick?+
No. Refill short of the listed quantity, start the engine and check for leaks, then shut it down on level ground and allow oil to return to the pan before bringing the dipstick to full. A published refill quantity is not permission to overfill.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
12026 Hyundai Palisade Owner's Manual — recommended lubricants and capacitiesPrimary Hyundai LX3 table specifying a 6.13-US-qt (5.8-L) drain-and-refill quantity, SAE 0W-20 and API SN PLUS/SP or ILSAC GF-6 for the 3.5L GDI.↗