Ignition SpecsAwaiting specific citation

2012 Hyundai Elantra Spark Plug Torque and Gap

2012 Hyundai Elantra Spark Plug Torque and Gap with application table, generation boundaries, verification steps, cautions and official manufacturer lookup.

Sources researched August 14, 2026·1 source reference·Print-friendly
Awaiting specific citationThis page links the manufacturer's official manual portal rather than a document for this exact application. Look the specification up for your VIN and model year before service work.How TorqueSheet prepares references
QUICK ANSWER

For the 2012 Elantra 1.8L, Hyundai's service procedure lists 14.7–24.5 N·m (10.8–18.1 lb-ft) for the spark plugs, 9.8–11.8 N·m for the ignition coils and a 1.0–1.1-mm plug gap.

Application note: These figures apply to the cited 2012 Elantra 1.8L application. Turbo, 2.0L, Elantra Touring and later Smartstream engines require separate plug and coil specifications.

For the 2012 Elantra 1.8L, Hyundai's service procedure lists 14.7–24.5 N·m (10.8–18.1 lb-ft) for the spark plugs, 9.8–11.8 N·m for the ignition coils and a 1.0–1.1-mm plug gap.

These figures apply to the cited 2012 Elantra 1.8L application. Turbo, 2.0L, Elantra Touring and later Smartstream engines require separate plug and coil specifications.

2012 Hyundai Elantra Spark Plug Torque and Gap — TorqueSheet technical feature image
TorqueSheet technical reference artwork · torquesheet.com
Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.
WORKBENCH VIEW

Interactive 2012 Elantra 1.8L specification guide

GAP
SELECTED1Position 1 of 4
TS

Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.

Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.

REFERENCE TABLE

Hyundai Elantra Spark Plug Torque Specs

APPLICATION / ITEMSPECIFICATIONNOTES
Spark plug torque14.7–24.5 N·m10.8–18.1 lb-ft
Ignition coil torque9.8–11.8 N·m7.2–8.7 lb-ft
Electrode gap1.0–1.1 mm0.0394–0.0433 in
Listed plug typesSILZKR6B11 / RER8WMPB4Verify current catalog supersession

The factory table identifies SILZKR6B11 and RER8WMPB4 plug types for the covered application. Keep contaminants out of the wells, hand-start plugs in a cool head and do not convert the published range into a universal Hyundai value.

Torque range, gap and coil fastener are separate values

Hyundai publishes 14.7–24.5 N·m for the plug and 9.8–11.8 N·m for the ignition-coil fastener. Confusing the two can leave a plug loose or damage the small coil bolt. Set the torque wrench from the correct row.

The same inspection procedure lists a 1.0–1.1-mm electrode gap. The specification image identifies SILZKR6B11 and RER8WMPB4, but a current parts catalog should confirm any supersession before purchase.

A clean installation protects the aluminum head

Work cold, disconnect coils by their locks rather than pulling wires and remove debris before the plugs come out. The service procedure warns against letting contaminants enter through the plug holes.

Thread replacements fully by hand, then apply the published clean-thread range. Seat coils squarely so their sealing caps meet the cover, tighten their separate fasteners and reconnect every lock. A fresh misfire after service often traces to seating or connection, not the plug gap.

Application boundaries for 2012 Elantra 1.8L

These figures apply to the cited 2012 Elantra 1.8L application. Turbo, 2.0L, Elantra Touring and later Smartstream engines require separate plug and coil specifications.

The factory table identifies SILZKR6B11 and RER8WMPB4 plug types for the covered application. Keep contaminants out of the wells, hand-start plugs in a cool head and do not convert the published range into a universal Hyundai value.

!
Build-specific specifications take priority

Hyundai 2012 Elantra 1.8L specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.

SHARED PROCEDURES

Procedures used with this specification

These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Hyundai 2012 Elantra 1.8L.

COMMON QUESTIONS

2012 Hyundai Elantra Spark Plug Torque and Gap FAQs

What is the 2012 Elantra 1.8L spark-plug torque?+

Hyundai lists 14.7–24.5 N·m, or 10.8–18.1 lb-ft.

What is the ignition-coil bolt torque?+

9.8–11.8 N·m, or 7.2–8.7 lb-ft.

What plug gap does the procedure list?+

1.0–1.1 mm, equivalent to 0.0394–0.0433 inch.

Does this apply to a turbo Elantra?+

No. It is scoped to the 2012 naturally aspirated 1.8L application.

SOURCE TRAIL

Technical sources

TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.

1Hyundai owner's manualsOfficial Hyundai market and model-year manual lookup.
SOURCES RESEARCHED · 2026-08-14

Sources shown.
Check the application.

480 reference pages.
21 vehicle makes.

Review status visible.
Every page shows its source trail.