2022 Ford Ranger Wheel Nut Torque and Recheck Procedure
2022 Ford Ranger Wheel Nut Torque and Recheck Procedure with application table, generation boundaries, verification steps.
Ford specifies 100 lb-ft (135 N·m) for the M12 x 1.5 wheel nuts on the 2022 U.S.-market Ranger.
Ford specifies 100 lb-ft (135 N·m) for the M12 x 1.5 wheel nuts on the 2022 U.S.-market Ranger.
This exact row applies to the 2022 Ranger and its factory wheel hardware. Global-market Rangers and the redesigned North American generation can use different specifications, so the model year and market still matter.
Interactive 2022 Ranger specification guide
STAR PATTERN
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.
Ford Ranger Wheel Torque Specs
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| Wheel nut torque | 100 lb-ft | 135 N·m |
| Thread size | M12 x 1.5 | 2022 factory hardware |
| Recheck interval | Within 100 mi | 160 km after removal |
| Mounting faces | Clean and corrosion-free | Required for proper seating |
Clean corrosion and loose particles from the hub pilot and both mounting faces, and keep the wheel-nut threads free of dirt and rust. Start every nut by hand, snug across the wheel in stages, then finish with a calibrated torque wrench. Ford directs owners to retighten the nuts within 100 miles (160 km) after the wheels have been removed.
Application boundaries for 2022 Ranger
This exact row applies to the 2022 Ranger and its factory wheel hardware. Global-market Rangers and the redesigned North American generation can use different specifications, so the model year and market still matter.
Clean corrosion and loose particles from the hub pilot and both mounting faces, and keep the wheel-nut threads free of dirt and rust. Start every nut by hand, snug across the wheel in stages, then finish with a calibrated torque wrench. Ford directs owners to retighten the nuts within 100 miles (160 km) after the wheels have been removed.
Ford 2022 Ranger specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Ford 2022 Ranger.
2022 Ford Ranger Wheel Nut Torque and Recheck Procedure FAQs
What is the wheel nut torque on a 2022 Ford Ranger?+
100 lb-ft (135 N·m) on the M12 x 1.5 wheel nuts fitted to the 2022 U.S.-market Ranger.
Do I need to retighten Ranger wheel nuts after fitting a wheel?+
Yes. Ford directs owners to retighten the nuts within 100 miles (160 km) of any wheel removal.
Does 100 lb-ft apply to a global-market or newer Ranger?+
Not automatically. This row is tied to the 2022 Ranger and its factory wheel hardware. Global-market Rangers and the redesigned North American generation can specify different values, so model year and market both matter.
Why does the hub face need cleaning before torquing?+
Corrosion and loose particles trapped between the hub pilot and either mounting face stop the wheel seating flat, so the clamp load reached at 100 lb-ft is not the clamp load the joint keeps once the debris crushes or the rust flakes away.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
12022 Ford Ranger Owner's Manual — wheel nutsPrimary Ford table specifying 100 lb-ft (135 N·m) for M12 x 1.5 wheel nuts and a recheck within 100 miles after removal.↗