Fluid CapacitiesAwaiting specific citation

2012 Dodge Durango Transmission Fluid Type and Capacity

2012 Dodge Durango Transmission Fluid Type and Capacity with application table, generation boundaries, verification steps.

Sources researched August 14, 2026·1 source reference·Print-friendly
Awaiting specific citationThis page links the manufacturer's official manual portal rather than a document for this exact application. Look the specification up for your VIN and model year before service work.How TorqueSheet prepares references
QUICK ANSWER

For the 2012 Durango 5.7L 4WD with the 65RFE, factory data specifies Mopar ATF+4, a 6.5-US-qt (6.2-L) service fill and a 16.9-US-qt (16-L) overhaul fill. Service and dry-fill numbers are not interchangeable.

Application note: These exact 65RFE values cover the cited 2012 4WD 5.7L application. The same factory table lists separate NAG1 figures, and later eight-speed Durangos require different fluid and procedures.

For the 2012 Durango 5.7L 4WD with the 65RFE, factory data specifies Mopar ATF+4, a 6.5-US-qt (6.2-L) service fill and a 16.9-US-qt (16-L) overhaul fill. Service and dry-fill numbers are not interchangeable.

These exact 65RFE values cover the cited 2012 4WD 5.7L application. The same factory table lists separate NAG1 figures, and later eight-speed Durangos require different fluid and procedures.

2012 Dodge Durango Transmission Fluid Type and Capacity — TorqueSheet technical feature image
TorqueSheet technical reference artwork · torquesheet.com
Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.
WORKBENCH VIEW

Interactive 2012 Durango 5.7L 4WD specification guide

SELECTED1Position 1 of 4
TS

Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.

Use this visual as an orientation aid. The exact VIN, engine, trim and manufacturer document control the specification.

REFERENCE TABLE

Dodge Durango Transmission Fluid Specs

APPLICATION / ITEMSPECIFICATIONNOTES
Required fluidMopar ATF+465RFE and cited NAG1 table
65RFE 4WD service fill6.5 US qt6.2 L
65RFE 4WD overhaul fill16.9 US qt16 L; dry reference
NAG1 service / overhaul5.3 / 8.1 US qt5.0 / 7.7 L; separate transmission

A service fill is an approximate pan/filter operation; overhaul fill is a dry-system reference affected by cooler and line volume. Establish final level with the exact temperature and level-check procedure rather than pouring in the table quantity blindly.

Service fill and overhaul fill answer different questions

The 65RFE 4WD service-fill figure is 6.5 qt, while 16.9 qt is the overhaul/dry reference. A pan service leaves fluid in the converter, cooler and passages, so using the overhaul number after an ordinary drain risks severe overfill.

Even dry capacity can vary with cooler type and line volume. Measure recovered fluid as a planning check, then use the transmission-specific temperature and level procedure; quantity alone cannot prove the final level.

Transmission identity controls the fluid row

Both the cited 65RFE and NAG1 rows specify Mopar ATF+4, but their capacities differ. Later Durangos introduced eight-speed units with a different fluid and level procedure, so a modern bottle recommendation must not be back-applied by model name.

Confirm the transmission code before opening the system. Keep tools and containers clean, replace the specified filter/seal components and do not mix unapproved universal fluids merely because the label mentions Chrysler compatibility.

Application boundaries for 2012 Durango 5.7L 4WD

These exact 65RFE values cover the cited 2012 4WD 5.7L application. The same factory table lists separate NAG1 figures, and later eight-speed Durangos require different fluid and procedures.

A service fill is an approximate pan/filter operation; overhaul fill is a dry-system reference affected by cooler and line volume. Establish final level with the exact temperature and level-check procedure rather than pouring in the table quantity blindly.

!
Build-specific specifications take priority

Dodge 2012 Durango 5.7L 4WD specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.

SHARED PROCEDURES

Procedures used with this specification

These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Dodge 2012 Durango 5.7L 4WD.

COMMON QUESTIONS

2012 Dodge Durango Transmission Fluid Type and Capacity FAQs

What fluid does the 2012 Durango 65RFE use?+

The cited factory table specifies Mopar ATF+4.

What is the 65RFE 4WD service-fill amount?+

Approximately 6.5 US qt (6.2 L).

What does the 16.9-qt figure mean?+

It is the 4WD 65RFE overhaul/dry-fill reference, not a routine drain-and-fill amount.

Can later Durango eight-speed fluid be used here?+

No. Match the exact transmission; later eight-speed applications use their own specified fluid and procedure.

SOURCE TRAIL

Technical sources

TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.

1Mopar vehicle informationOfficial Dodge, Ram, Chrysler and Jeep model-year information lookup.
SOURCES RESEARCHED · 2026-08-14

Sources shown.
Check the application.

480 reference pages.
21 vehicle makes.

Review status visible.
Every page shows its source trail.