Chevy Silverado 6.2 Oil Capacity by Model Year
Silverado 1500 6.2L oil-capacity chart with filter-included values, generation breaks, refill procedure, dipstick checks, FAQs, cautions.
Silverado 1500 6.2L trucks from 2007–2013 commonly list 6.0 US qt (5.7 L) with filter; 2014-and-newer 6.2L light-duty applications commonly list 8.0 US qt (7.6 L).
Silverado 1500 6.2L trucks from 2007–2013 commonly list 6.0 US qt (5.7 L) with filter; 2014-and-newer 6.2L light-duty applications commonly list 8.0 US qt (7.6 L). That published capacity is a service starting point, not permission to empty the last fraction of a bottle into the crankcase. Drain time, oil temperature, cooler volume, filter construction, vehicle angle, and residual oil all affect the amount required to reach the dipstick's full mark.
The 6.2L badge spans Gen IV and Gen V small-block installations. A generation change, not cab length or wheel size, explains the jump from the six-quart service row to the eight-quart row. This guide separates the generations in the table, keeps filter-included and filter-excluded figures distinct, and explains a repeatable refill check. Camaro, Corvette, Escalade and dry-sump 6.2L figures are not Silverado capacities. Do not use an HD diesel or gasoline row from the same combined manual.
Refill below the listed total first, start the engine long enough to fill the filter, inspect for leaks, shut it down, wait on level ground, and finish by dipstick. That process protects against both an underfilled engine and the aeration, leakage, or catalyst trouble that overfilling can cause.
Interactive Chevrolet Silverado 1500 6.2L oil-service workflow
Branded downloads includedPNG and PDF exports carry the TorqueSheet logo, torquesheet.com, source-page URL, and republishing attribution request. The PDF source link is clickable.
Follow the workflow from vehicle identification through final dipstick verification. Published capacities are starting quantities, not a substitute for the level check.
Chevy Silverado 6.2 Oil Capacity
| APPLICATION / ITEM | SPECIFICATION | NOTES |
|---|---|---|
| 2007–2013 1500 6.2L | 6.0 US qt | 5.7 L with filter; verify RPO |
| 2014+ 1500 6.2L | 8.0 US qt | 7.6 L with filter in cited later manuals |
| 2019 transition trucks | Identify LD vs. new body | Use the matching manual and RPO |
| Final level | Dipstick after drain-back | GM calls capacity approximate |
The 2014 K2XX generation is the major capacity break. The 2019 transition year also included old-body LD and new-body 1500 trucks, so body generation and RPO matter as much as the registration year.
The generation break that matters for Silverado 1500 6.2L
The 6.2L badge spans Gen IV and Gen V small-block installations. A generation change, not cab length or wheel size, explains the jump from the six-quart service row to the eight-quart row. Read the model-year and engine row together; a badge, displacement, or oil cap by itself may span more than one internal engine revision. The values below are drain-and-refill quantities with the filter unless the row says otherwise.
Camaro, Corvette, Escalade and dry-sump 6.2L figures are not Silverado capacities. Do not use an HD diesel or gasoline row from the same combined manual. Use the oil grade and manufacturer approval from the same model-year manual as the capacity. Capacity, viscosity, and approval are three separate specifications.
Oil-capacity chart for Silverado 1500 6.2L
Use the chart as an application lookup. The 6.2L badge spans Gen IV and Gen V small-block installations. A generation change, not cab length or wheel size, explains the jump from the six-quart service row to the eight-quart row. A capacity printed beside the wrong engine code is not “close enough”; even engines sharing the same displacement can have different pans, filters, coolers, or drain-back behavior. If the vehicle has been swapped, rebuilt, or fitted with an aftermarket pan, use the installed hardware manufacturer's capacity and calibration marks.
The most common current application begins near 6.0 US qt. Begin below that amount and finish by measurement. The difference between the add and full marks is often about one quart, but do not assume that relationship when the dipstick is aftermarket, damaged, or paired with a non-original tube. Investigate a reading that remains absent or implausibly high.
Camaro, Corvette, Escalade and dry-sump 6.2L figures are not Silverado capacities. Do not use an HD diesel or gasoline row from the same combined manual.
Common causes of a capacity mismatch
The 2014 K2XX generation is the major capacity break. The 2019 transition year also included old-body LD and new-body 1500 trucks, so body generation and RPO matter as much as the registration year. If the verified dipstick result and the expected quantity disagree materially, stop and identify the cause instead of choosing whichever number is more convenient.
- The lookup used the model name but not the model year or engine code.
- The quoted figure excluded the filter while the filter was replaced.
- The vehicle was not level or the oil had not drained back before checking.
- An oil cooler, remote filter, aftermarket pan, engine swap, or incorrect dipstick changed the system.
- The old filter gasket remained on the housing or a leak began after startup.
- The crankcase was filled to the advertised capacity without a final dipstick check.
Chevrolet Silverado 1500 6.2L specifications can change by model year, engine, platform, wheel, and installed component. Confirm the VIN or engine identity, part numbers, fastener condition, and the current manufacturer instructions before service.
Procedures used with this specification
These steps are the same for every vehicle in this family, so they are documented once rather than repeated on each page. The values above remain specific to this Chevrolet Silverado 1500 6.2L.
Chevy Silverado 6.2 Oil Capacity by Model Year FAQs
How much oil does the Silverado 1500 6.2L take?+
Silverado 1500 6.2L trucks from 2007–2013 commonly list 6.0 US qt (5.7 L) with filter; 2014-and-newer 6.2L light-duty applications commonly list 8.0 US qt (7.6 L). Confirm the year/engine row and finish by the dipstick rather than treating the capacity as an exact pour-in amount.
Technical sources
TorqueSheet favors engine- and component-specific manufacturer instructions over unsourced universal values.
12013 Chevrolet Silverado Owner's Manual — capacitiesPrimary Chevrolet manual for the 2013 truck line; use the 6.2L light-duty gasoline row and do not confuse it with HD engines.↗22019 Chevrolet Silverado 1500 Owner's Manual — capacitiesPrimary Chevrolet manual listing 8.0 qt (7.6 L) with filter for the 6.2L L87 in the new-body 2019 Silverado 1500.↗3GM Owner Center manualsOfficial GM lookup for the applicable model-year owner manual.↗